White's Electronics dfxonly.com
The Site Devoted Solely to the World's Greatest Metal Detectors -- the DFX and the V3!
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
Jimmy Sierra Accessories

Jimmy Sierra Loops

 
Post new topic   Reply to topic    dfxonly.com Forum Index -> Ask Jimmy Sierra
View previous topic :: View next topic  
Author Message
outdoors2i



Joined: 26 Sep 2008
Posts: 20
Location: Southwest,Virginia

PostPosted: Sat Nov 15, 2008 4:59 pm    Post subject: Jimmy Sierra Loops Reply with quote

When are the DFX Bigfoot, Hotfoot and 15'Magnum Force loops going to be for sale to the pubic again? I've seen where they were back in production this past summer, but none for sale on your website? Thanks, Gary
Back to top
View user's profile Send private message
jimmysierra



Joined: 09 May 2006
Posts: 286

PostPosted: Mon Nov 17, 2008 4:00 am    Post subject: jimmy sierra loops Reply with quote

Hi OUtdoors 2i

I feel like the guy crying "wolf" I have been promising our Jimmy Sierra coils were coming soon for so long that i am beginning to doubt my own words. The facts are that we have never really had any floor stock since Jim Karbowski died a year ago last June. that is almost 18 months. I never thought it would take this long, but the job was enormous. First I had to get the coils reverse engineered as Jim left no real information behind. His notes were impossible to understand. However, Bill Lahr in LA was able to get the Bigfoot and 25 inch MFF coils done as they are my most popular. We suspended the 15 inch MFF and Hotshot before Jim died as they overlapped Whites factory coils . We may make some Hotfoot coils when we get back on track. I thought this would be the hard part, but it seems the production system was the most difficult. The coils are fully hand made and our new facility for production is Discovery Electronics in Sweet Home, Oregon
They were able to finish a few partially done loops left behind by Jim, but they went quickly to my dealers. Discovery is finally just about finished with manufacturing procedures and hopes to being sending us product in dribbles to start. I went up to Oregon to visit his facility this last week and it looks like he is coming....of course not fast as we like, but I have learned to be patient. I do see some light at the end of the tunnel. We will start with XLT (6.5 khz) and DFX/MXT 25 inch coils and Bigfoot loops. Keep your eye on our jimmysierra.com website. best regards, Jimmy
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    dfxonly.com Forum Index -> Ask Jimmy Sierra All times are GMT - 2 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group